Hisense 2.5HP R32 Standard Non-Inverter Air Con (DB) [AN25DBG]
Features :
- Horsepower : 2.5 HP
- Non-Inverter Technology
- Rotary Compressor
- LED Temperature Display
- Fast Cooling
- Large Blade, Long Air Distance
- I Feel (uniform temperature) : room temperature is recorded by the sensor in the remote control, more accurate temperature reading
- 100 % Pure Copper Pipes : higher temperature and pressure resistance, better weldability
- Anti-Corrosion Gold Fin
- 24 Hours Timer
- 3 Speed and Auto Indoor Fan Control
- Vertical Auto Swing Louver
- Sleep Mode : automatically set to an ambient temperature during sleeping time
- Smart Function : auto adjust to the best mode according to the room temperature
- Super Function
- Auto Restart
- Dimmer
- 2 Ways Draining : Yes, Left and Right
- Ionizer Filter : inhibit bacteria, pollen, and mold species
- Long Piping : 25 m (Maximum)
- Handheld LCD Wireless Remote Controller
- Removable and Washable Panel
- Washable PP Filter
- Double Fireproof Design : control boards of the air conditioners are covered by fireproof coating and put into closed metal shell
- 3 Star Energy Efficiency
- Warranty (Online registration within 14 days from the date of purchase)
Specifications :
- Cooling Capacity (Btu/h) : 22000 Btu/h
- Energy Efficiency Ratio, EER (W / W) : 2.95
- Voltage (V) : 220 V - 240 V
- Frequency (Hz) : 50 Hz
- Phase : 1P
- Current (A) : 9.2 A (Cooling)
- Rated Input (W) : 2186 W (Cooling)
- Locked Rotor Amperage, LRA (A) : 48 A
- Degree of Protection (In / Out) (IP) : IPX0 / IPX4
- Air Circulation : 1200 m ³ / hour
- Indoor Unit Noise Level (H / L ) : 45 / 36 dB (A)
- Outdoor Unit Noise Level (H) : 56 dB (A)
- Refrigerant Type : R32
- Refrigerant Amount : 1250g
- Average Energy Consumption / Year (kWh) : 3325 kWh
Product Dimensions and Weight :
- Indoor Unit
- Dimensions (W x H x D) (mm) : 1100 mm x 325 mm x 244 mm
- Net Weight : 14.5 kg
- Gross Weight : 17.0 kg
- Outdoor Unit
- Dimensions (W x H x D) (mm) : 860 mm x 650 mm x 310 mm
- Net Weight : 45.0 kg
- Gross Weight : 49.0 kg
- Refrigerant Pipe Diameter
- Liquid Pipe (inch) : 3/8 inch
- Gas Pipe (inch) : 5/8 inch
- Pipe Extension
- Maximum Pipe Length (m) : 25 m
- Maximum Height Interval (m) : 10 m
Note :
- Please read the air conditioner's user manual carefully before installing the unit and before using and operating this air conditioner.
- Do not install this appliance in the laundry area.
- Installation of this appliance must be carried out by experienced service technicians and installers.
- For models using R32 refrigerant, piping connection should be conducted outdoors.
- Do not let air enter the refrigeration system or discharge refrigerant when moving the air conditioner.
- When charging refrigerant into the system, make sure to charge in liquid state.
- Check the connecting cables and pipes carefully, make sure they are correct and firm before connecting the power of the air conditioner.
- Keep the interconnection cable away from the copper tube.
- There must be an air-break switch.
- The maximum length of the connecting pipe between the indoor unit and outdoor unit should be less than 5 meters.
- Children cannot play with this appliance.
- Disconnect all remote electric power supplies before servicing the air conditioner.
- Servicing shall only be performed as recommended by the equipment manufacturer.
- Maintenance and repair requiring the assistance of other skilled personnel shall be carried out under the supervision of a trained person.
- If the supply cord is damaged, the supply cord must be replaced by the manufacturer, service agent or similarly trained persons.
