Panasonic 56 inch 4 Blade DC Motor Ceiling Fan with nanoe™ X and ECONAVI [F-M14MEVBKH]
Features :
- Ceiling fans lower the temperature in the room by approximately 3°C (comparing breeze and without breeze)
- nanoe™ X :
- a fine (5 to 20nm) water particle containing many hydroxyl radicals
- releases these water particles to inhibit viruses, bacteria, odours, allergens, mould, PM 2.5 and pollen
- DC Motor :
- mono form exterior with a built-in PCB (Printed Circuit Board)
- high motor power output : produces plenty of air volume and wide air flow
- energy saving compared to AC motor
- quiet operation
- small, compact and light DC Motor
- ECONAVI (intelligent microprocessor) :
- sensor detects the ambient temperature every 3 minutes
- adjusts the fan speed as the temperature rises and falls
- energy saving
- 1/f Yuragi function
- fans are equipped with fluctuating pattern of air velocity and wind force to generate a gentle breeze
- Remote control with LCD screen (uses two AAA batteries)
- Buttons :
- ON / OFF, 1/f Yuragi, Timer, Time setting, Fan speed (1 - 9), Sleep mode, Auto mode (ECONAVI mode)
- 1 year warranty
Specifications :
- 4 blades
- Glass reinforced polypropylene (PPG) fan blade
- Width : Ø 1400 mm (56 inch)
- Height : 314 mm
- Air velocity : 185 (m / min)
- Air delivery : 225 (m³ / min)
- Remote control (9 speed) :
- 1 - 8 hour on / off timer
- 2 - 8 hour sleep timer
- Fan speed (RPM) : 81 (low), 239 (high)
- Power consumption (W) : 4 (low), 43 (high)
- Colour : Black
Note :
- Before using this appliance, read the operating instructions of this appliance.
- Children cannot play with this appliance.
- Electrical and installation work needs to be carried out by qualified personnel.
- Ensure that the ceiling hook can sustain more than 10 times the weight of the ceiling fan.
- Avoid fixing the fan inside the dome ceiling.
- Ceiling fan must be mounted above 2.5 m from the floor and 1 m from the wall to the fan blade.
- Do not install the ceiling fan at oily, dusty places, windy, wet, high vibration areas, flammable areas, places containing chemicals and alkali.
- Do not damage the wire during installation.
- Do not paint the fan blades.
- Do not touch the ceiling fan while the fan is operating.
- Do not sprinkle water on the ceiling fan.
- Do not expose yourself continuously to direct wind from the ceiling fan.
- Switch off the power supply and wait until the blades are fully static, before cleaning or doing any maintenance job.
- Keep the ceiling fan clean.
- Wipe away dirt with a clean soft cloth, ordinary soap and water. Wipe it again to dry it.
- Do not use solvents and chemicals to clean the fan.
- Do not bend the fan blade while cleaning.
- Stop using the ceiling fan when any abnormality or failure occurs and turn “OFF” the Miniature Circuit Breaker (MCB).
- If there are unusual oscillating movement, immediately stop using the ceiling fan and contact the manufacturer, service agent or trained personnel.
