Canopy Type [F-M20LYVBKRH]
Pipe Type [F-M20LYVBKSH]
Panasonic Big 80 inch 8 Blade DC Motor Ceiling Fan with Motion Sensor
Features :
- Ceiling fans lower the temperature in the room by approximately 3°C (comparing breeze and without breeze)
- Motion sensor
- changes the fan speed according to human activity (high / low / no motion)
- motion sensor coverage : 4 m width, 2.5 m to 3 m height
- reduces over operation and reduces waste electricity
- Twin DC Motor :
- high motor power output : produces plenty of air volume and wide air flow
- energy saving compared to AC motor
- quiet operation
- small, compact and light DC Motor
- 1/f Yuragi function
- fans are equipped with fluctuating pattern of air velocity and wind force to generate a gentle breeze
- Remote control with LCD screen (uses two AAA batteries)
- Buttons :
- ON / OFF, 1/f Yuragi, Timer, Time setting, Fan speed (1 - 9), Sleep mode, Sensor mode
- Bigger fan blade : higher and wider air delivery
- Multi-level safety protection :
- Prevention of body falling off : Safety wire, cut-off safety switch
- Prevention of blade falling off : Safety blade hook
- Prevent motor from overheating : Safety fuse
- 1 year warranty
Specifications :
- 8 blades
- Glass reinforced polypropylene (PPG) and metal fan blade
- Width : Ø 2000 mm (80 inch)
- Height :
- 446 mm [Canopy type : F-M20LYVBKRH]
- 702 mm [Pipe type : F-M20LYVBKSH]
- Air velocity : 170 (m / min)
- Air delivery : 360 (m³ / min)
- Remote control (9 speed) :
- 1 - 8 hour on / off timer
- 2 - 8 hour sleep timer
- Fan speed (RPM) : 50 (low), 150 (high)
- Power consumption (W) : 3 (low), 60 (high)
- Voltage (V) : 240
- Frequency (Hz) : 50
- Colour : Black
- Variation :
- Canopy Type [F-M20LYVBKRH]
- Pipe Type [F-M20LYVBKSH]
Image 1 : Canopy Type [F-M20LYVBKRH]
Image 2 : Pipe Type [F-M20LYVBKSH]
Note :
- Before using this appliance, read the operating instructions of this appliance.
- Children cannot play with this appliance.
- Electrical and installation work needs to be carried out by qualified personnel.
- Ensure that the ceiling hook can sustain more than 10 times the weight of the ceiling fan.
- Avoid fixing the fan inside the dome ceiling.
- Ceiling fan must be mounted above 2.5 m from the floor and 1 m from the wall to the fan blade.
- Do not install the ceiling fan at oily, dusty places, windy, wet, high vibration areas, flammable areas, places containing chemicals and alkali.
- Do not damage the wire during installation.
- Do not paint the fan blades.
- Do not touch the ceiling fan while the fan is operating.
- Do not sprinkle water on the ceiling fan.
- Do not expose yourself continuously to direct wind from the ceiling fan.
- Switch off the power supply and wait until the blades are fully static, before cleaning or doing any maintenance job.
- Keep the ceiling fan clean.
- Wipe away dirt with a clean soft cloth, ordinary soap and water. Wipe it again to dry it.
- Do not use solvents and chemicals to clean the fan.
- Do not bend the fan blade while cleaning.
- Stop using the ceiling fan when any abnormality or failure occurs and turn “OFF” the Miniature Circuit Breaker (MCB).
- If there are unusual oscillating movement, immediately stop using the ceiling fan and contact the manufacturer, service agent or trained personnel.
